Hydz φ23H10 Nau'in Fin ɗin Drive na waje
Halayen Lantarki
| Sashi na No: HYR-2310A | ||
| 1 | Mitar Resonance (KHz) | 3.5 ± 0.3 |
| 2 | Matsakaicin Input Voltage (Vp-p) | 30 |
| 3 | Aiki a 120Hz (nF) | 12000± 30% a 100Hz/1V |
| 4 | Fitar da sauti a 10cm (dB) | Min.85 a 10cm, 12Vp-p, 3.5KHz |
| 5 | Amfanin Yanzu (mA) | ≤5 a 3.5KHz Square Wave 12Vp-p |
| 6 | Yanayin Aiki (℃) | -20～+70 |
| 7 | Yanayin Ajiya (℃) | -30 + 80 |
| 8 | Nauyi (g) | 0.7 |
| 9 | Kayan Gida | Black ABS |
Girma da Material (naúrar: mm)
Haƙuri: ± 0.5mm Sai da Aka ƙayyade
Sanarwa (Karfafawa)
1. Abun na iya lalacewa idan an yi amfani da matsalolin injiniya fiye da ƙayyadaddun bayanai.
2. Kula don kare da'irar aiki daga hauhawar wutar lantarki sakamakon wuce kima da ƙarfi, faɗuwa, girgiza ko canjin zafin jiki.
3. A guji yawan jan wayar gubar saboda waya na iya karye ko kuma wurin saida ya fito.
Sanarwa (Yanayin Ajiya da Aiki)
1. Yanayin Adana Kayan samfur
Da fatan za a adana samfuran a cikin ɗaki inda zafin jiki / ɗanshi ya tsaya kuma ku guje wa wuraren da akwai manyan canje-canjen zafin jiki.
Da fatan za a adana samfuran a ƙarƙashin yanayi masu zuwa:
Zazzabi: -10 zuwa + 40 ° C
Lashi: 15-85% RH
2. Ranar Karewa akan Adanawa
Ranar karewa (rayuwar shiryayye) na samfuran shine watanni shida bayan bayarwa a ƙarƙashin sharuɗɗan fakitin da ba a buɗe ba.Da fatan za a yi amfani da samfuran a cikin watanni shida bayan bayarwa.Idan kun adana samfuran na dogon lokaci (fiye da watanni shida), yi amfani da su a hankali saboda samfuran na iya lalata su cikin solderability saboda ajiya a ƙarƙashin yanayi mara kyau.
Da fatan za a tabbatar da solderability da halaye na samfuran akai-akai.
3. Sanarwa akan Ajiye Kayan samfur
Don Allah kar a adana samfuran a cikin yanayin sinadarai (Acids, Alkali, Bases, Organic gas, Sulfides da sauransu), saboda ana iya rage halayen su cikin inganci, ana iya lalata su a cikin solderability saboda ajiya a cikin yanayin sinadarai.
