• babban_banner_01

HYDZ Piezoelectric sounder melody buzzer

Takaitaccen Bayani:

Siffofin:
• Ƙananan sautin mita (2kHz).
• An lulluɓe sinadarin Piezo tare da sarrafa ruwa.


Cikakken Bayani

Tags samfurin

Halayen Lantarki

1

Ƙimar Wutar Lantarki (VAC)

16V

2

Wutar Lantarki Mai Aiki (V)

1 zuwa 25

3

Fitar da sauti a 10cm (dB)

≥75

4

Amfanin Yanzu (mA)

≤4

5

Mitar Resonant (Hz)

2000± 500

6

Yanayin Aiki (℃)

-20 zuwa 80

7

Kayan Gida

PPO

8

Nauyi (g)

8.0

Girma da Material (naúrar: mm)

HYDZ Piezoelectric sounder melody buzzer2

Haƙuri: ± 0.5mm Sai da Aka ƙayyade

Siffofin

  • Karancin sautin mitar (2kHz).
  • An lulluɓe kashi na Piezo tare da aikin tabbatar da ruwa.

Sanarwa (HANDLING)

  • Kar a yi amfani da son rai na DC ga buzzer na piezoelectric;in ba haka ba juriya na rufi na iya zama ƙasa kuma yana shafar aikin.
  • Kar a ba da kowane irin ƙarfin lantarki sama da abin da ya dace ga buzzer ɗin lantarki na piezo.
  • Kar a yi amfani da buzzer na piezoelectric a waje.An tsara shi don amfanin cikin gida.Idan dole ne a yi amfani da buzzer na piezoelectric a waje, samar da shi da matakan hana ruwa;ba zai yi aiki akai-akai ba idan aka danshi.
  • Kada a wanke buzzer na piezoelectric da sauran ƙarfi ko ba da damar iskar gas ya shiga yayin wanka;duk wani kaushi da ya shiga cikinsa na iya zama cikin dogon lokaci ya lalata shi.
  • Ana amfani da kayan yumbu na piezoelectric mai kauri kusan 100µm a cikin janareta na buzzer.Kada a danna janareta mai sauti ta cikin ramin sakin sauti in ba haka ba kayan yumbu na iya karye.Kar a tara buzzers na piezoelectric ba tare da shiryawa ba.
  • Kada a yi amfani da kowane ƙarfin injina zuwa buzzer na piezoelectric;in ba haka ba lamarin na iya lalacewa kuma ya haifar da aiki mara kyau.
  • Kada a sanya wani abu na kariya ko makamancin haka a gaban ramin sakin sauti na buzzer;in ba haka ba, matsa lamba na sauti na iya bambanta kuma ya haifar da aikin buzzer mara ƙarfi.Tabbatar cewa igiyar tsayuwa ko makamancin haka ba ta shafa mai buzzer ba.
  • Tabbatar da siyar da tashar buzzer a 350°C max.(80W max.)(Tafiyar baƙin ƙarfe) cikin daƙiƙa 5 ta amfani da solder mai ɗauke da azurfa.
  • Guji yin amfani da buzzer na piezoelectric na dogon lokaci inda duk wani iskar gas (H2S, da sauransu) ke wanzu;in ba haka ba sassan ko janareta na sauti na iya lalacewa kuma su haifar da rashin aiki mara kyau.
  • Yi hankali kada a sauke buzzer na piezoelectric.
Ku rubuta sakonku anan ku aiko mana